To Keep Your Film Looking Great, Follow A Few Simple Guidelines: Wait 48 hours after installation to wash your car. Stubborn stains can be removed with 99% isopropyl alcohol. Take care to keep these chemicals off the vehicle’s paint. Light scratches in the film will self-heal in 20-30 minutes at room temperature. In colder conditions, or to accelerate the process, pour warm water (120°F) over the affected area. Avoid using a pressure washer or high-pressure water source near the edges of the film, it can cause the film to lift and/or become damaged. Detailing Clay can be used to remove contaminants that are on the film.

To Keep Your Film Looking Great, Follow A Few Simple Guidelines: Wait 48 hours after installation to wash your car. Stubborn stains can be removed with 99% isopropyl alcohol or lacquer thinner. Take care to keep these chemicals off the vehicle’s paint. Light scratches in the film will self-heal in 20-30 minutes at room temperature. In colder conditions, or to accelerate the process, pour warm water (120°F) over the affected area. Avoid using a pressure washer or high-pressure water source near the edges of the film, it can cause the film to lift and/or become damaged.

XPEL PRIME Automotive Window Films Were Designed To Keep Their Flawless Appearance And Clarity For Many Years. Follow These Tips To Properly Care For Your Windows And Keep Them Looking Their Best: Keep in mind that your window tint may have a hazy appearance or moisture bubbles for up to ten days after installation. These conditions will disappear once the moisture used to apply your tint dries up completely. Wait approximately 3-5 days after installation before rolling down or cleaning your windows based on the climate in which it was installed. Use a microfiber towel slightly dampened with water to clean your windows. If necessary, mild, non-ammonia glass cleaners may also be used. Avoid the use of abrasive materials such as scouring pads, to clean your tinted windows.